Shri Shivaji Education Society, Amravati’s,
College of Engineering & Technology, Akola
(Accredited by National Board of Accreditation, India)
N.H.No. 6, At Post : Babulgaon (Jh.), Akola – 444 104.
Maharashtra State, INDIA.
DEPARTMENT OF CHEMICAL ENGINEERING
HOME COURSES-WINTER-SEMESTER WHAT NEW STUDENTS(new) FEEDBACK
SANJAY KRISHNA NAVHALE
M.E. CHEMICAL ENGG.
LECTURER,
DEPARTMENT OF CHEMICAL ENGINEERING
Laxminagar, Mothi Umari, Akola-444005. Maharashtra State, India.
e-mail : [email protected] [email protected]
www.members.fortunecity.com/navhalesk www.geocities.com/navhalesk
Telephone No.+91 (0724) 2428596 [R] 2259024 EXT:35 [O]
SYLLABUS
Section-A
Unit No. I Transient Response of Control System, Optimization
Unit No. II Stability, Root Locus, Transient Response, Application
Of Root Locus To Control System. Frequency
Response Methods. Design Of Nyquist Criteia.
Unit No. III Process Applications, Controller Mechanisms
Section – B
Unit No. IV Development And Control System For Various
Chemical Industries, Case Studies
Unit No. V Introduction To Advance Control Techniques As Feed
Forward Control, Cascade Control Ration Control,
Adaptive Control And Digital Computer Control.
Unit No. VI Dynamics And Control Of Chemical Equipments Such
As Heat Exchangers, Distillation Columns, Absorption
Column Etc.
Practical : Based on Above Syllabus.
Books Recommended:
1] Process Control- Peter Harriott, McGraw Hill, New York, 1964.
2] Process System Analysis And Control; Koppel, Coughanowr, McGraw
Hill.
3] Automatic Process Control; D. P. Eckman, Wiley Publication.
4] Chemical Process Control; George Stephanopoulos; Prentice Hall Of
India Pvt. Ltd.
5] Process System Analysis And Control; Donald R. Coughanowr;
McGraw-Hill.
COURSE DESCRIPTIONS
6SCECT3 Process Dynamics and Control
Course:
B. Tech. Chemical Engineering [Eight Semesters],
Amravati University, Amravati.
Class And Year:
VIII Semester Final Year Session: 2005-06
Day And Time:
Monday 1.20 PM -- 2.20 PM 1hr. Room No.: 301
Tuesday 1.20 PM -- 2.20 PM 1hr. Room No.: 301
Thursday 3.30 PM -- 4.30 PM 1hr. Room No.: 301
Friday 1.20 PM -- 2.20 PM 1hr. [Tutorial]
Lecturer:
Sanjay Krishna Navhale [M. E. Chemical Engineering]
Grading:
Internal : 20 Marks
Class Test : 75%
Attendance: : 25%
External : 80 Marks
Total : 100 Marks
Objectives:
Understanding the Basics Principle, Fundamental Concept of Process Control.
Understanding the Dynamic Behavior of Chemical Process through Mathematical Modeling.
Understanding the Mechanisms of Different Controller and Control Valve.
Understanding the Feedback Controllers and the Selection Of The Appropriate Controllers.
The Analysis of Stability Characteristics and Frequency Response Techniques for Tuning Of Controller Used.
Multivariable Control and Process Interaction.
List Of Books Used
1] Process Control and Instrumentation; R. P. Vyas; Central Techno Publications, Nagpur-10; First Edition; 2003.
2] Process Systems Analysis and Control; Donald R. Coughanowr; Mcgraw-Hill International Edition; Second
Edition; 1990
3] Process Instrumentation And Control; A. P. Kulkarin; Nirali
Publication; Fifth Edition; 1997.
SYLLABUS
SECTION-A
Unit No. I Relevance of mechanical operations in industry,
1. Size reduction, stages of reduction, Equipments operating
variables, laws of energies, energy requirements.
2. Screening: Screen analysis, particle size distribution.
Unit No. II
1. Classification : Equal-falling particles, equipments, jigging, tabling.
2. Gravity settling, drag force, terminal settling velocity.
3. Sedimentation : Continuous thickeners.
Unit No. III
1. Storage and handling of solids, transportation
Mixing, Mixers, agitation, types of equipments.
SECTION – B
Unit No. IV
1. Filtration : Theory, operation, types, Flotation agents, flotation cells.
2. Filter Calculations, filtration equation for compressible and non- compressible cakes, specific cake resistance.
3. Filtration - Constant pressure and constant rate and their equipments.
Unit No. V
1. Centrifuges: Theory, Equipments, types and calculations.
2. Cyclones: Hydro cyclones, liquid scrubbers and electronic precipitators.
Unit No. VI
1. Adsorption, theory, type and application, Langmuir's &
Freundlich's equation, nature of adsorbents, industrial adsorbents.
2. Adsorption on fixed bed, fluidized beds.
3. Recent developments in mechanical operation equipments.
PRACTICAL : Based on above syllabus.
BOOKS RECOMMENDED:
1. Momentum Transfer Operation : S.K.Gupta, TMC, 1979.
2. Unit Operations Of Chemical Engineering : Mccabe And Smith,.TMC
3. Chemical Engineering Vol. I: Coulson & Richardson, Pergamon', 1979
4- Principles Of Unit Operations : A. .S. Foust, Et-Al.
5. Unit Operations : C. G. Brown.
6. Introduction To Chemical Engineering : Beder & Bachero.
7. Mass Transfer Operations ; R. E. Treybal
8. Mechanical Operations Vol.I : R. S. Hiremath & A.. P. Kulkarni.
COURSE DESCRIPTIONS
5SCE(FPOPC)T2 CHEMICAL ENGINEERING (MECHANICAL OPERATIONS)
Course:
B. Tech. Chemical Engineering [Eighth Semesters]
Amravati University, Amravati.
Class and Year:
V Semester [Third Year] Session: – 2005-06
Day and Time:
Monday 1.20 Pm -- 2.20 Pm 1hr. Room No.: 302
Tuesday 1.20 Pm -- 2.20 Pm 1hr. Room No.: 302
Thursday 2.20 Pm -- 3.20 Pm 1hr. Room No.: 302
Friday 2.20 Pm -- 3.20 Pm 1hr. Room No.: 302
Saturday 2.20 Pm -- 3.20 Pm 1hr. Room No.: 302
Lecturer:
Sanjay Krishna Navhale [M. E. Chemical Engineering]
Grading:
Internal: 20 Marks
1. Class Test: 75% [Two Tests]
2. Attendance: 25%
External: 80 Marks [University Exam]
Objectives:
Mechanical - Non-Mechanical Separation of Solids Form Solid.
Size Reduction of Solids Particles and Energy Requirement.
Filtration; Separation of Solids From a Suspension in Liquid.
Mixing of Liquid-Liquid, Solid- Liquid and Solid- Solid.
Conveyor for Transportation Bulk Solids.
Centrifugation: Separation of Solid-Liquid and Liquid-Liquid
Separation of Solids Based on Surface Properties.
List Of Books Used:
1] Unit Operations-I; K. A. Gavahne; Nirali Prakashan; Tenth Edition.
2] Unit Operations Of Chemical Engineering [Mechanical Operations] Volume-I; R. S. Hiremath/ A. P. Kulkarni; Everest Publication House, Pune; Seventh Edition
3] Unit Operation; George Granger Brown; Asia Publishing House;
First Edition
4] Unit Operations Of Chemical Engineering; McCabe And
Smith;TMC.
LABORATORY PRACTICAL
Laboratory: CHEMICAL ENGINEERING MECHANICAL OPERATIONS
Course:
B. Tech. Chemical Engineering [Eighth Semesters]
Amravati University, Amravati.
Class and Year:
V Semester [Third Year] Session: – 2005-06
Day and Time:
Wednesday 11.00 Pm -- 1.00 PM 2 hrs. Batch:II
Thursday 11.00 Pm -- 1.00 PM 2hrs. Batch: I
Laboratory Incharge:
Sanjay Krishna Navhale [M. E. Chemical Engineering
Laboratory Staff:
Mr. S. J. Bhakare [Jr. Technical Assistant]
Mr. V. G. Bhakare [Lab. Attendant]
Mr. V. T. Dhoble [Peon]
Grading:
Internal: 25 Marks
1. Class Test: 80% [Two Tests]
2. Attendance: 20%
External: 25 Marks [University]
Objectives:
To educate students for practical application of the mechanical operations.
Understanding the actual performance of equipment for separation of solids and size reduction.
Performing various experiments on equipment & understanding the theoretical concept in depth.
Understanding the application of various applications.
List of practical in
Chemical Engineering Mechanical Operations Laboratory (CEMO)
|
Sr. No. |
Name of experiment |
|
1 |
To study screen analysis and plot a graph for cumulative screen analysis. |
|
2 |
To design a thickener using sedimentation test |
|
3 |
To study the relationship of drag coefficient and modified Reynolds number for a body falling through viscous fluid. |
|
4 |
To verify laws of crushing and grinding using ball mills. |
|
5 |
To verify laws of crushing and grinding using hammer mill. |
|
6 |
To study screen analysis for differential screen analysis. |
|
7 |
To find the efficiency of a fixed screen hydraulic jig for coal sand mixture. |
|
8 |
To measure the cake film resistance for caco3 slurry under constant pressure filtration. |
|
9 |
To study centrifuge. |
|
10 |
To verify the efficiency of cyclone separator with different particle size. |
|
11. |
To determine the efficiency of screen. |
|
12. |
To determine particle diameter by fluidized bed. |
This site was last updated 12/01/05
| Courses-Win-Sem | Whats-New | Students | Feedback |